A high-tech enterprise integrating R&D, manufacturing, sales, and technical services for new materials and equipment.
Recommended Reading for the BeiYike Academic Paper Award | Zhu Taotao, Ningxia University: Research on the Preparation of SiC Ceramic Membranes
In order to express our gratitude to the broader community of researchers for their continued support, encouragement, and promotion of high-quality academic research in related fields, Since its establishment, Anhui Beiyike has launched the “Beiyike Academic Paper Scholarship Program,” aimed at identifying and supporting researchers at universities and research institutions both in China and abroad in their academic pursuits. During the event, we received submissions of outstanding journal articles from across the country. An increasing number of researchers working on advanced materials are choosing Beiyike’s products to drive scientific innovation and achieve significant academic breakthroughs.
01 Article Highlights
As global urbanization accelerates and industrial activities become more frequent, water scarcity and pollution are becoming increasingly severe. To meet humanity’s demand for freshwater, there is an urgent need to develop low-cost, environmentally friendly, and energy-efficient wastewater treatment and purification technologies. Traditional wastewater treatment methods—such as chemical coagulation [1], ion exchange [2], and activated carbon adsorption [3]—may suffer from issues like secondary pollution, high costs, or poor separation performance.
However, membrane separation technology is regarded as one of the most promising approaches for wastewater treatment, owing to its high separation efficiency, environmental friendliness, and low energy consumption [4,5]. Membrane materials constitute the core of this technology; based on the material of the separation membrane, they can be classified into organic membranes and inorganic membranes.

02 Product Citation
The equipment used in this study is an MF-1700C-II box-type muffle furnace manufactured by Anhui Beiyike Equipment Technology Co., Ltd. in China. We employed this furnace to thermally treat the SiC ceramic membrane support prepared with silicon–manganese slag as a sintering aid. Following a pre‑set program, the sample was held at 950 °C for 2 hours to remove organic components and develop a porous structure, after which it was further calcined at 1400 °C for 3 hours to obtain a sample with a uniform microstructure. The furnace features precise temperature control, and its accurately programmed heating and cooling cycles help prevent the formation of microcracks during sintering, thereby providing essential assurance for the smooth progress of our research.

http://www.ahbeq.com/product/224.html
In this installment of the Beiyike Academic Paper Scholarship Program, we have invited the paper’s author, Zhu Taotao, to share his profound insights into his research focus, as well as his reflections on the relationship between thinking and verification—and their significance—throughout the research process.
1. Could you please briefly introduce your research focus? Why did you choose this particular field of study?
My research focuses on SiC ceramic membranes for water treatment and on the coupling of ozone oxidation with SiC ceramic membranes. Currently, industrialization has led to severe water pollution, and conventional wastewater treatment technologies—such as chemical flocculation, ion exchange, and activated carbon adsorption—suffer from low separation efficiency, high operating costs, large land footprints, and significant secondary pollution. In contrast, membrane separation technology, owing to its high separation performance, low energy consumption, and environmental friendliness, is regarded as one of the most promising approaches for wastewater treatment.
2. During the course of your research, did you encounter any difficulties? If so, how did you overcome them?
We have encountered challenges—for example, when sintering samples in an air atmosphere within a muffle furnace, the high sintering temperature can promote the formation of a silica layer on the SiC surface, resulting in poor acid–alkali resistance during wastewater treatment. Subsequent literature review revealed that the acid–alkali corrosion performance is closely related to the phase composition of the sintering neck. After extensive screening of sintering additives and experimental evaluation of the sintering‑neck microstructure, we ultimately identified a specific additive that significantly enhances alkali resistance.
Microcracks observed in the samples have a significant impact on their properties; subsequent literature review indicates that the heating protocol may influence this outcome. Thanks to the precise temperature control of our muffle furnaces, we have minimized the formation of microcracks in samples during sintering by finely tuning the furnace’s heating and cooling cycles.
3. In your opinion, what is the most critical stage of the research process, and why?
I believe the most crucial aspect of research lies in confronting challenges and finding solutions. This process hones one’s ability to tackle problems independently; although it may be lengthy, the insights gained serve as valuable experience, helping to avoid unnecessary detours in future experiments.
5. What are the main aspects of the research significance of this submitted paper—its practical implications or its theoretical contributions?
At the application level, the primary focus is on SiC ceramic membranes bonded via oxidation reactions at high temperatures, which addresses the issue of poor alkali resistance encountered when using reaction-sintered SiC ceramic membranes for treating acidic and alkaline wastewater. This approach also resolves the challenge of disposing of silicon–manganese slag, thereby enabling the resource‑based utilization of waste materials. At the theoretical level, the key innovation involves forming alkali‑resistant mullite, calcium feldspar, and calcium pyroxene bonding phases through oxidation reactions at elevated temperatures, which serve as sintering necks between SiC particles.
6. We often hear the saying, “Don’t conduct research for the sake of research.” In your view, what is the ultimate purpose and significance of research? And what would be your message to those who receive awards?
I believe the ultimate purpose and significance of research lie in learning to solve problems through the research process.
Message from the award recipient: Wishing Anhui Beiyike Equipment Technology Co., Ltd. continued success and even greater achievements.

Anhui Beiyike Equipment Technology Co., Ltd.

Looking ahead, Beiyike continues to stay attuned to market trends and pursues a dual‑track development strategy that integrates both research & education and industry‑research collaboration. Currently, we offer four major product lines—carbon material synthesis, lithium‑ion battery materials preparation, OLED material purification and evaporation deposition, and semiconductor‑specific equipment—comprising more than ten sub‑categories. Our products are widely adopted by domestic materials manufacturers, research institutions, and academic universities, and are also exported to countries and regions including South Korea, the United States, Russia, and Pakistan.
Currently, the company operates two production bases in Hefei and Chaohu. It has established strategic partnerships with numerous domestic universities and research institutes, collaborating with their new‑material R&D teams, and ranks among the leaders in market share. The company’s core business is centered on vacuum technology, heating technology, and plasma technology.
The company has been honored with titles such as “High-Tech Enterprise,” “Small Giant Enterprise in Science and Technology,” “Engineering Technology Research Center for Graphene-Growth Specialized Equipment,” and the “Rising Star Award for Influence in the Optoelectronic Display Materials Industry.” BeiYike has obtained ISO 9001, ISO 14001, OHSAS 18001 certifications, as well as CE safety compliance certification, and has filed more than thirty patent applications.
Zhu Taotao of Ningxia University, Bei Yike Scholarship
Previous page
Real-time news
Contact Us
Service Hotline:400-0033-603
Sales Hotline:180 1997 0653,180 1997 3217,133 0551 1955
Sales Hotline:0551-65146333
After-sales hotline:0551-65148123
Sales email:besteq@163.com
Company Address: No. 6, Yixiu Road, Feixi County, Hefei City, Anhui Province
Anhui Beiyike Equipment Technology Co., Ltd.
Follow the official account
Research Equipment Consultation
Hubei, Jilin, Shaanxi, Heilongjiang
Tianjin, Liaoning, Henan, Hebei
Shanghai, Sichuan, Chongqing, Inner Mongolia
Xinjiang, Ningxia, Tibet, Qinghai
Foreign Trade Consulting
Sublimation Instrument Consultation
Industrial Equipment Consulting
Jiangsu, Zhejiang, Guangdong, Fujian
Hunan Shanxi Gansu Hainan
Guangxi
Beijing, Tianjin, Liaoning, Henan
Hebei, Shanghai, Sichuan, Chongqing
Inner Mongolia, Xinjiang, Ningxia
Tibet Qinghai
Anhui, Guizhou, Yunnan, Hubei
Jilin, Shaanxi, Heilongjiang, Jiangxi
Shandong
Foreign Trade Consulting
Sublimation Instrument Consultation
Process Consulting
After-sales consultation
Copyright © 2026 Anhui Beiyike Equipment Technology Co., Ltd. All rights reserved.












