A delegation from the Economic Development Zone of Feixi County investigated the company's products and scientific research results
Recently, Lu Ge, member of the Standing Committee of the Feixi County Party Committee, deputy head, and first secretary of the Economic Development Zone of Feixi County, visited the company. General Manager Kong Lingjie warmly received and accompanied the inspection.
Leaders of Hefei Investment Promotion Bureau surveyed the Best R & D Center
On March 8, 2019, Zhu Shengli, deputy secretary general of the Hefei Municipal Government and director of the Investment Promotion Bureau, and his party visited the product research and development center of Best Group. Research.
Best Group 2018 Highlights
On January 30, 2019, Best Group ’s annual meeting was successfully held!
The Fifth National Energy Storage Science and Technology Conference
From October 26 to 28, 2018, the Fifth National Energy Storage Science and Technology Conference was held at Huazhong University of Science and Technology.
  • 2

    2

  • 1

    1

Messages

Leave your valuable advice

We will reply to you first time

Copyright 2017  Anhui BEQ Equipment Technology Co., Ltd.   皖ICP备12002778号-1   Powered by: www.300.cn

>
>
>
>
>
rotary CVD with feeding& discharging system for Carbon coating experiment BTF-1200C-II-R-CVD
Page view:
Product name

rotary CVD with feeding& discharging system for Carbon coating experiment BTF-1200C-II-R-CVD

Affiliate classification
零售价
0.00
Quantity
-
+
库存
0
没有此类产品
Buy now
Add to Cart
Online consultation
Mailbox:beq02@ahbeq.com;besteq@163.com
Telephone:+86 173 5409 7574
Product description
Product parameters

  Main features

 

The tube of the device can rotate 360°, which helps the sintering of the powder to be more uniform, can be inclined at a large angle, and is convenient for feeding and discharging. The inclination angle is  Between 0-35°

 

Structure specification:consist of Liquid gasification , Heating system, feeding system, discharging system, gas control system, low vacuum system, furnace tube rotation system, electronically controlled operating system

 

Liquid gasificationGasification of the liquid can reach 200 degrees

 

HEATING SISTEM:

The heating cavity adopts alumina fiber products, and its extremely low thermal conductivity and specific heat capacity ensure rapid heating and low heat storage of the furnace, and is particularly suitable for material process research of scientific research units. The heating element is heated by a resistance wire and is suitable for medium and low temperature heating systems.

Temperature control system adopts the classic closed-loop negative feedback control system. The temperature control instrument uses intelligent program temperature adjustment instrument temperature control and power modulator control; the load uses small voltage and large current control, which greatly improves the life of the heating element. The temperature measuring element adopts a K type thermocouple. The single-loop temperature controller can self-tune the PID parameters without the intervention of the operator. It can adjust the output signal according to the rising and lowering requirements of different temperature curves. At the same time, the system sets the over-temperature, under-temperature and break-off alarm protection functions. Reduced the need for operator experience.

Power

4KW

Voltage

AC220V  50/60Hz

Max. temp

1200℃

Constant working temp

1100℃

Tube  size

Ø60*420*2+Ø100*360mm

Furnace tube rotation rate

0~60r/min

Furnace body inclination angle

0~35°

chamber

Alumina, high temperature fiber

thermocouple

K type

Temp accuracy

±1℃

Temp control

PID automatic control with 30 steps programmable

10”LCD touch screen control

Heating zone length

200mm+200mm

Constant zone length

250mm

Heating element

Resistance wire

 

 

 feeding system

The feeding system speed is continuously adjustable. When the feeding is stopped and the furnace body is tilted to the maximum, the material will not leak from the outside of the feeding system. The feeding system is easy to disassemble, and the material can be manually fed after disassembly, and the equipment can operate normally.

Feeding rate

0.2-100ml/min

Particle size

<0.5mm

discharging system

can automatically discharge when the furnace body is inclined and discharged.

 

 gas control system

The four gases can be controlled to mix and match according to different flow rates, and can also be independently controlled. The mass flow meter is installed in a sealed movable cabinet, and is composed of a super clean double-throw stainless steel tube and a precision double ferrule joint.

 

Connector

Double ferrule stainless steel joint

Standard range(N2)

100sccm 200sccm ,500sccm,optional

accuracy

±1.5%F.S

Linearity

±1%F.S

Repeatability

±0.2%F.S

Response time

气特性:1~4 Sec,电特性:10 Sec

Working pressure range

0.1~0.5 MPa

Max.pressure

3MPa

Connector

Φ6,1/4''

Display

 3 figrues show

Working tem. environment

5~45 High purity gas

Pressure vacuum gauge

-0.1~0.15 MPa, 0.01 MPa/grid

valve

Φ6

 

 

 low vacuum system

Equipped with a vacuum mechanical pump that can be vacuumed to allow the unit to react in a vacuum environment.

Relative air humidity

≤85%

Working temp. environment

5℃~40℃

Working voltage

220V±10%  50~60HZ

power

1KW

Pumping rate

10m³/h

Ultimate vacuum

5X10-1Pa

Working pressure range

1.01325X105~1.33X10-2Pa

Oil capacity

1.1L

Inlet/Outlet caliber

KF25

Noise

50dB

connection

Bellows, manual flapper valve connected to bellows

 

 furnace tube rotation system

The furnace tube can be rotated at a constant speed of 360°, the rotation speed is continuously adjustable from 0 to 60 r/min, and it can be operated for a long time at a speed of 60 r/min.(>24h)

Corresponding parameter set not found, please add it in property template of background
暂未实现,敬请期待
暂未实现,敬请期待
Previous article
Next article

购物车浮动框

There are no products in the shopping cart, so buy it now!