1400℃真空淬火炉 BTF-1400C-BVT

Power

输入电源

Power rated: 8KW

额定功率：8KW  

Voltage

电压

Voltage rated:  AC220V 50/60HZ

额定电压： AC220V 50/60HZ

Working Temperature

工作温度

Max. Temperature: 1400℃( 1 hr)

最高温度：1400℃ (1小时)

Continuous working temperature: ≤1300℃

持续工作温度：≤1300℃

Recommended heating Rate: ≤10℃/min

推荐升温速率：≤10℃/分

Temperature Controller

控温方式

PID automatic control and auto-tune function.

   模糊PID控制和自整定调节

30 programmable segments for precise thermal processing.

   智能化30段可编程控制

Built-in protection for the over-heated and broken thermocouple. 

超温和断偶报警功能

HMI plus PLC Control 10 inch LCD screen Control

人机界面加PLC控制，10寸液晶屏控制

Length of heating zone

加热区长度

320mm

Heating Elements

加热元件

Silicon carbon rod

硅碳棒

Temperature Accuracy

控温精度

+/- 1℃

Processing tube

炉管

Tube size：Φ80*1200mm(optional）

炉管尺寸：Φ80*1200mm

Two ceramic tube blocks are included for blocking heat radiation generated from tube center, must be fully inserted into the furnace chamber before heating

两个氧化铝管堵阻挡管中心产生的热辐射，必须在加热前塞进炉膛的正确位置

Liquid storage tank

储液罐

Size: Height 350mm, diameter ≥150mm

尺寸：高度350mm，直径≥150mm

Material:stainless steel 304

材质：304不锈钢材质

The bottom end uses the spring as the buffer when the sample falls

底端采用弹簧作为样品下落时的缓冲。

Passable atmosphere protection be protected (according to the customer's own process requirements) and the liquid is not filled so that the sample will fall and then gradually out there will have a space buffer to prevent it from spilling into the corundum pipe.

使用过程中可通气氛保护(根据客户自身工艺要求）且液体不盛满这样样品落下来反渐出去有一个空间缓冲，防止其溅到刚玉管内。

Dimensions

尺寸

Furnace size:  850*600*1960mm(L*W*H )

炉子尺寸： 850*600*1960mm(长*宽*高 )

Net Weight

净重

150kg

Vacuum Flange

真空法兰

With water-cooled flange, the upper flange can manually control clamping the sample and releasing the sample (only reserve the interface of connecting the sample to the wire, do not provide the wire,） can realize the sample leaving the thermal field quickly; The lower flange realizes the connection between the vacuum chamber and the storage tank through the electric plate valve.

    采用水冷法兰，上端法兰可手动控制夹住样品和放开样品（只预留接样品挂丝的接口，不提供丝），可实现样品快速离开热场；下端法兰通过电动插板阀实现真空腔体与储液罐之前的连接。

Sample clamping and release implementation details

样品夹持以及放开实现细节

The upper end flange end cover is inserted into a small iron core by opening a small hole, the iron core and the flange end cover are extruded and sealed by sealing ring, and the upper end is fixed with the iron core through the split excitation electromagnet (the electric time division excitation electromagnet absorbs the iron core to ensure that it does not fall; The electromagnet withdraws the absorbing force and the sample falls under the action of gravity.

上端法兰端盖开一个小孔插入一根小铁芯，铁芯跟法兰端盖间通过密封圈挤压密封，上端通过分励电磁铁固定住铁芯（通电时分励电磁铁吸合铁芯保证不下落；断电时分励电磁铁撤出吸合力，样品在重力作用下下落）

Vacuum Pressure

真空压力

133torr can be achieved by mechanical pump

   机械泵可达133torr（1pa）

10^-6 torr can be reached by molecular pump

   分子泵可达10^-6torr（10^-3pa）

Please click the picture below to order vacuum pump

点击下列图片订购真空部件    

Warranty

质保

One year limited warranty with lifetime support  (Such consumable parts as tube, quartz block, and O-rings, etc. are NOT supported by the warranty)

一年质保终身支持（消耗品如炉管，石英管堵，O型圈等不在质保范围内）

Warning

注意事项

Small cracks may appear on the surface of the refractory ceramics over extended use. This is a normal occurrence and the cracks may be repaired with alumina coating.

在使用过程中炉膛表面可能出现细小裂纹。这是正常情况，裂纹可以用氧化铝涂层修复。

Compliance

认证

CE Certified

CE认证

The furnace is ready to pass TUV (UL61010) or CSA certification at extra cost.

可付费进行TUV(UL61010)或CSA认证

Operation instructions

操作指导

Click to download the operating manual

点击下载说明书