undefined
undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined
  • undefined

Box-type sublimation purification equipment BOF-2C-400D

Equipment Model: BOF-2C-400D Equipment Components: Sliding‑rail feeding system, heating system, combined collection system, preheating and vacuum system, industrial control and operating system.

Keywords:

Close
  • 产品对比
Total X Clear all
  • Product Information
  • Product Video
  • Experimental Case
  • Accessories and Consumables
  • Structural Description

    · Forklift‑type feeding system: a rail‑sliding in/out loading mode, equipped with a five‑layer heated pallet rack, each layer holding two pallets and sealed on all sides—top, bottom, left, and right. Each rack layer incorporates heating elements with controllable temperature, and the pallets can be freely loaded and unloaded from the rack. An air inlet is mounted on the outer side of each pallet rack to direct airflow into the chamber. A protective shield and graphite seal are installed between the door panel and the chamber, preventing material deposition on the door while maintaining the base vacuum.

    · Heating System: The heating chamber features an integrated design that combines alumina ceramic fiber components with the heating element, along with a metallic inner cavity. The temperature-sensing element is a Type K thermocouple, and the temperature controller is an intelligent programmable PID controller that can automatically adjust its output signal to meet the heating and cooling requirements of various temperature profiles.

    · Combined Collection System: The collection zone consists of two collection chambers. The section connected to the heating chamber is equipped with a heating system, allowing for temperature control. The other collection chamber is fitted with a sliding mechanism, facilitating material retrieval, disassembly, and cleaning. The bottom of the collection tube is outfitted with an air-cooling system, while the distal end features a hatch and an exhaust port that connects to a mechanical pump.

    · Preheating and Vacuum System: The intake system is equipped with a preheating unit; the preheated gas enters through the inlet of the loading tray, passes through the main heating chamber, and is then discharged via the collection line. The equipment includes a mechanical pump and a resistive vacuum gauge, and comes with compatible components such as bellows, manual butterfly valves, clamps, and other connecting parts.

    · Industrial Control and Operating Systems: Equipped with a 15-inch industrial control screen, it integrates heating, vacuum, data processing, and other control functions into a single unit.

    Key Features

    · A rail‑sliding loading/unloading system, equipped with a material‑carrying tray, enables continuous sublimation by simply swapping trays.

    ·   Each pallet layer is equipped with a heating system, featuring controllable temperature and uniform thermal distribution.

    ·   Equipped with a gas drainage system to facilitate the deposition of sublimated material in the collection zone.

    ·   Equipped with a touch-screen control, it offers intuitive and convenient parameter settings and operation, with automatic parameter logging.

    ·   Integrated device design and integrated management—sleek and convenient.

    Heating system

    · Cavity dimensions: Length × Height × Depth = 900 × 1000 × 1400 mm (subject to the actual product)

    · Operating temperature: 450℃

    · MAX Temperature: ≤600℃

    · Insulation material: alumina ceramic fiber

    · Heating element: heating rod

    · Temperature-sensing element: Type K thermocouple

    · Sealing method: Graphite sealing

    · Heating rate: 1–15°C/min, adjustable

    · Temperature control method: Human–machine interface combined with PLC control, 15-inch LCD screen operation, and dual‑control via digital industrial controllers. Dual control is achieved using an industrial intelligent temperature controller and accompanying software, employing fuzzy‑logic PID control.

    · Inner cavity material: 304 stainless steel

    Slide-rail feeding system

    · Single pallet dimensions: 800*640*50mm (Length*Width*Height)

    · Single pallet weight: approximately 10 kg

    · Tray quantity: 10 trays across 5 layers

    · Tray material: 304 stainless steel

    · Aeration: Each pallet layer is sealed on all sides—top, bottom, and sides—and each layer is equipped with blow-in ports on both sides. A mass flow meter ensures uniform air distribution.

    Collection System

    · Collection tube size: Heating zone: Φ400×500 mm, detachable; Insulated protective zone: Φ400×1300 mm, with sliding rails, detachable.

    · Cavity connection flange: Custom-shaped customization

    · Cooling method: Air-cooled

    · Heating method: heating wire

    · Drainage: Equipped with a drainage system

    Preheating and Vacuum System

    · Preheating temperature: 400 °C

    · Furnace tube dimensions: Φ100mm

    · Heating element: resistance wire

    · Temperature control system: 30‑segment programmable temperature control, with auto‑tuning of PID parameters, and equipped with over‑temperature and thermocouple‑open‑circuit alarm functions.

    · Heating zone length: 400 mm

    · Mechanical pump: BSV30, pumping speed 30 m³/h

    · Vacuum gauge: Chengdu Zhenghua, resistance gauge

    · Vacuum range: ≤100 Pa

    · Exhaust port: KF25/40

    Industrial Control and Operating Systems

    · Control method: 15-inch touch screen

    · Functionality: Integrates the on/off control of all device components, as well as vacuum and heating functions; ensures stable and reliable software communication; provides visualized temperature monitoring; and enables real-time data recording with export capability.

    · Power supply: 30 kW; the entire machine operates on a 380 V, three-phase five-wire system.

    · Three-color indicator: Yellow indicates standby, green indicates operation, and red indicates an alarm.

    · Alarm and Protection: ① Over-temperature audible and visual alarm; ② Thermocouple failure audible and visual alarm; ③ End-of‑process audible and visual alarm; ④ Front‑stage pump abnormality audible and visual alarm; ⑤ Equipped with a mechanical emergency stop button.

    Equipment dimensions &Weight

    · Overall dimensions: Length × Width × Height: 6,500 × 1,400 × 1,855 mm (with the feed slide rail extended); Note: A 500 mm clearance is reserved between the material‑discharge tray and the main heating chamber.

    · Control cabinet dimensions: 950×500×2000 mm (L×W×H)

    · Overall machine weight: ≤2000 kg; floor load capacity: approximately 400–500 kg/m².

    Warranty period

    ·   One-year warranty, lifetime maintenance.

    · Consumable parts such as heating elements, sealing rings, furnace tubes, and sample holders are not included.

    · Damage caused by human error or manufacturing defects—such as exposure to corrosive gases, strong acids, or strong alkalis—is not covered under the warranty.

Consultation Message