TEL:400-0033-603
2
1
Anhui BEQ Equipment Technology Co., Ltd
Hefei Baisi New Materials Research Institute
Hefei Oulai Di Optoelectronics Technology Co., Ltd
Copyright 2017 Anhui BEQ Equipment Technology Co., Ltd. 皖ICP备12002778号-1 Powered by: www.300.cn
水冷法兰
This is a pair of sealing flange with SS water cool tubing . If you cannot use a ceramic block in two ends of the tube, you must use the water cool tubing to keep flange cool (otherwise silicone o-ring may get damaged).Dimensions (50/60/80/100mm) and material (304S, 316L) are optional.
这是一对带有SS水冷管的密封法兰。如果在管的两端不能使用陶瓷块，则必须使用水冷管来保持法兰冷却(否则硅胶O型圈可能会损坏)。尺寸(Φ50/60/80/100mm)、材质(304S、316L)可选。
规格参数SPECIFICATIONS
|
主要特点 |
Made of Stainless Steel with double high-temperature silicon O-rings on the flange. 法兰上采用双高温硅胶O型圈不锈钢制成。 Stainless steel needle valve with 1/4" pipe adaptor. 不锈钢针阀配“1/4”管接头。 The assembly kit will seal ceramic and quartz tube.Vacuum meter is installed in one side of flange. 组装套件将密封陶瓷和石英管，在法兰一侧安装真空表。
|
|
Vacuum level 真空度 |
10E-4 torr by molecular pump and 10E-2 torr by mechanical pump 10e-4乇 分子泵 和10e-2乇 机械泵 |
|
可选的部分 |
For CVD application, please choose our Anti-corrosive Vacuum Gauge. 对于CVD系统，请选择我们的防腐蚀真空计。 We provide various Fitting Ends for separate purchase. 我们提供不同的装配末端，供单独购买。 The product is heavy, please consider our Adjustable Tube Support. 产品重量大，请考虑我们的可调管支架。
|
|
安装视频 |
|
|
尺寸 |
Click to enlarge |
|
注意事项 |
Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products. 必须在法兰前放置耐火管块，避免热辐射熔化硅胶O型圈老化。 Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs. 请不要拧紧法兰上的三个六角螺丝，以免发生超压事故。推荐扭矩为35～40英寸。 For safety reasons, it is strictly forbidden to enter any flammable or corrosive gas into our flange. If you have any questions, please contact us为了安全考虑，严禁通入任何有毒、易燃或腐蚀性气体进入我们的法兰。如果有疑问请与我们联系。
|
