折页法兰

Features
主要特点

Seal tube by tightening screws on the flange without any welding or gluing.

通过在法兰上拧紧螺钉而不进行任何焊接或胶合的密封管。

Excellent for any type of tubing: ceramic, glass, quartz and steel pipe.

适用于任何类型的管材：陶瓷、玻璃、石英和钢管。

Installation requires drilling holes on the furnace casing to mount the flange support.

安装需要在炉体上钻孔以安装法兰支架。

Made of Stainless Steel (SS304)  with high-temperature silicon O-rings on each flange.

由不锈钢（SS304）制成，每个法兰上都有高温硅胶O型圈。

Delicate metal support allows for both vertical and horizontal adjustment.

精致的金属支持允许垂直和水平调整。

Openable flange is designed for sample easily loading / unloading.

可开式法兰是为了便于样品的装卸而设计的。   

Descriptions

描述

Left end comes with a hinged flange with a barbed valve, 1/4" feedthrough and pressure gauge.

左端带有一个带倒钩阀的铰链法兰，1/4个“穿通和压力表”。

Mechanical Pressure Gauge is available as an alterlative of regular gauge.

机械压力表可作为常规量规的一种替代形式。

Right end comes with a hinged flange with a barbed valve and KF25 vacuum port.

右端带有带倒钩阀的铰链法兰和KF25真空端口。

KFD25 angle valve may require for connecting the vacuum port to a vacuum pump. 

KFD25角阀可能要求将真空口连接到真空泵上。

Vacuum level真空度

10E-5 torr by molecular pump and 10E-2 torr by mechanical pump

10- E-5乇的分子泵和10E-2的机械泵

Application Note

Place the o-ring on the notch of the hinged flange.

将O型圈放置在折页法兰的缺口上。

A tube block is required behind each flange to avoid the silicone O-rings melting.  

每个凸缘后面需要一个管座，以避免硅胶O型圈熔化。

Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.

请不要拧紧法兰上的三个六角螺丝，以免发生超压事故。推荐扭矩为35～40英寸。

For safety reasons, BEQ prohibits the use of any toxic, flammable or corrosive gas into our flange.

为了安全考虑，BEQ禁止使用任何有毒、易燃或腐蚀性气体通入我们的法兰。