undefined
undefined
undefined
undefined
+
  • undefined
  • undefined
  • undefined
  • undefined

1100℃ Large-Diameter Quartz Tube Furnace BTF-1100C-IIIA

Equipment Model: BTF-1100C-IIIA Equipment Overview: This 1100°C high‑temperature quartz tube furnace features a large tube diameter, an extended temperature‑controlled zone, and precise temperature control, making it ideal for sintering multiple samples or conducting pilot‑scale experiments. An optional inner tube can be installed inside the main quartz tube, enabling the growth of large‑area, single‑layer graphene. Equipped with a CNC display, operation is simpler and more convenient. Application Scope: Widely used in semiconductor manufacturing, nanomaterials research, carbon fiber production, graphene synthesis, and other fields, this equipment offers exceptional value for money.

Keywords:

Close
  • 产品对比
Total X Clear all
  • Product Information
  • Product Video
  • Experimental Case
  • Accessories and Consumables
  • Key Features

    ·   Large tube diameter, long isothermal zone, and precise temperature control make it ideal for sintering multiple samples or pilot-scale experiments. Stage‑specific temperature profiles can also be programmed to meet process requirements (please consult our sales team for details).

    ·   An inner tube can be optionally installed inside the large quartz tube, enabling the growth of large-area single-layer graphene.

    ·   Equipped with a CNC display, operation is simpler and more convenient.

    ·   It is widely used in fields such as semiconductors, nanomaterials, carbon fibers, and graphene, making it a highly cost-effective device.

    Main Parameters

    · Voltage: AC380V , Rated power: 12 kW

    · Maximum temperature: 1100℃

    · Continuous Operating temperature: ≤1000℃

    · Recommended heating rate: ≤10°C/min

    ·   Heating zone length: 300 + 300 + 300 mm; constant-temperature zone length: 600 mm.

    · Heating element: resistance wire (molybdenum‑doped iron‑chromium‑aluminum alloy)

    · Thermocouple: Type K thermocouple

    Furnace tube &Flange

    ·   Furnace tube diameter: Φ150/Φ210/Φ280 × 1400 mm (diameter customizable)

    ·   Both end flanges are water-cooled hinge-type flanges; the water‑cooling process mitigates heat dissipation in large‑diameter pipes, thereby reducing seal aging. The hinged design facilitates easy insertion and removal of samples.

    ·   Two alumina tubes block the thermal radiation emitted from the center of the tube. The alumina tube plug must be inserted into the designated section of the furnace tube prior to heating. )

    Temperature control system

    ·   Fuzzy PID Control and Self-Tuning Regulation

    ·   Intelligent 30-segment programmable control allows customers to customize heating and cooling profiles according to their specific needs.

    ·   Features ultra‑gentle operation and open‑circuit alarm functionality.

    · Temperature control accuracy: ±1℃

    Vacuum pressure

    · Model: DRV-10

    · Pumping speed: 10 m³/s 3/h

    · Ultimate pressure: 5×10 -1 Pa

    · Motor power: 400 W

    · Weight: 25 kg

    · Required oil quantity: 1.1 L

    (Optional: domestically produced or imported high-vacuum unit)

      

    Size &Weight

    · Device dimensions: 1300x650x1000mm

    · Equipment net weight: approximately 250 kg

    Warranty period

    ·   One-year warranty, lifetime maintenance.

    · Consumable items such as thermocouples, silicone rings, quartz tubes, and sample crucibles are not included.

    · Damage caused by the use of corrosive gases and acidic gases is not covered under warranty.

    Precautions

    ·   The gas pressure inside the quartz tube must not exceed 0.02 MPa (gauge pressure).

    ·   For experiments involving sample heating, it is not recommended to operate the system with both the vacuum valve and the purge valve at the furnace tube flange closed. If it is necessary to close these valves during heating, continuously monitor the pressure gauge; if the pressure exceeds 0.02 MPa, immediately open the vent valve to prevent accidents such as rupture of the furnace tube or ejection of the flange.

    ·   If, due to process requirements, flammable, explosive, or toxic gases must be used, you are responsible for implementing all necessary safety and explosion‑proof measures. Our company shall not be liable for any issues arising from improper operation during the use of such gases.

Consultation Message