1700℃ High-Temperature Tube Furnace BTF-1700C
Keywords:
Category:
- 产品对比
- Product Information
- Product Video
- Experimental Case
- Accessories and Consumables
-
Key Features
· Silicon‑molybdenum rod heaters are densely arranged throughout the furnace chamber, ensuring a uniform temperature field and an exceptionally long constant‑temperature zone.
· Double-layer shell structure with an air-cooling system
· Well-structured, with simple and convenient experimental procedures.
· Install flange support brackets to reduce the load on the furnace body.
· High-purity alumina is used as the furnace lining material, and the furnace surface is coated with a high-temperature alumina coating imported from the United States, which enhances heating efficiency and extends the service life of the furnace.
Main Parameters
· Voltage: 220V, Rated Power: 5.2kW
· Maximum temperature: 1700℃
· Continuous Operating temperature: ≤1600℃ (negative pressure operation is not recommended above 1400°C)
· Recommended heating rates: ≤10°C/min below 1200°C; ≤5°C/min from 1200°C to 1500°C; ≤2°C/min above 1500°C.
· Heating zone length: 300 mm, Constant-temperature zone length: 150 mm
· Heating element: silicon molybdenum rod
· Thermocouple: Type B thermocouple
Furnace tube &Flange
· Furnace tube diameter: Alumina tube Φ60/Φ80 × 1000 mm (tube diameter customizable)
· It is equipped with a set of stainless steel quick‑connect flanges (available in two types: clamp flanges and hinged flanges) and features silicone sealing rings for a secure seal.
· Vacuum level: 0.5 Pa (using a mechanical pump)
· It is equipped with a mechanical pressure gauge, with a measurement range of -0.1 to 0.15 MPa.
· Use a pipe plug to block the thermal radiation emitted from the center of the pipe; it must be installed before heating and positioned correctly within the furnace chamber.
Temperature control system
· Fuzzy PID Control and Self-Tuning Regulation
· Intelligent 30-segment programmable control allows customers to customize heating and cooling profiles according to their specific requirements.
· Features ultra‑gentle operation and open‑circuit alarm functionality.
· Temperature control accuracy: ±1℃
Vacuum System (Optional)
· Model: DRV-10
· Pumping rate: 10 m³/h
· Ultimate pressure: 5×10 -1 Pa (no-load, cold state)
· Oil capacity: 1.1 L
· Inlet/Outlet Port Diameter: KF25
(Optional: domestically produced or imported high-vacuum unit)
Size &Weight
· Device dimensions: 61 0x440x720mm
· Equipment net weight: approximately 130 kg
Warranty period
· One-year warranty, lifetime maintenance.
· Consumable items such as thermocouples, silicone rings, quartz tubes, and sample crucibles are not included.
· Damage caused by improper user handling, as well as damage resulting from the use of corrosive or acidic gases, is not covered under warranty.
Precautions
· The internal air pressure must not exceed 0.02 MPa (gauge pressure).
· Due to the high internal pressure of the gas cylinder, a pressure-reducing valve must be installed when introducing gas into the pipeline. To ensure safety, it is recommended to use a pressure-reducing valve with a rated pressure below 0.02 MPa and a measurement range of 0.01–0.1 MPa, which will provide greater accuracy and safety during operation.
· For experiments involving sample heating, it is not recommended to operate the system with both the vacuum‑pumping valve and the gas‑inlet valve at the furnace‑tube flange closed. If it becomes necessary to close these valves during heating, closely monitor the pressure gauge; if the pressure exceeds 0.02 MPa, immediately open the vent valve to prevent accidents such as rupture of the furnace tube or ejection of the flange.
· Customers are advised against using flammable, explosive, or toxic gases. If the process genuinely requires such gases, please implement all necessary safety and explosion‑proof measures on your own. Our company shall not be held liable for any issues arising from the use of flammable, explosive, or toxic gases.
· The gas flow rate should be less than 200 SCCM (200 mL/min).
· Due to the manufacturing process of alumina tubes, there is a risk of tube breakage during the sintering process, which cannot be entirely eliminated. Please be advised.
-










Consultation Message
Contact Us
Service Hotline:400-0033-603
Sales Hotline:180 1997 0653,180 1997 3217,133 0551 1955
Sales Hotline:0551-65146333
After-sales hotline:0551-65148123
Sales email:besteq@163.com
Company Address: No. 6, Yixiu Road, Feixi County, Hefei City, Anhui Province
Anhui Beiyike Equipment Technology Co., Ltd.
Follow the official account
Research Equipment Consultation
Hubei, Jilin, Shaanxi, Heilongjiang
Tianjin, Liaoning, Henan, Hebei
Shanghai, Sichuan, Chongqing, Inner Mongolia
Xinjiang, Ningxia, Tibet, Qinghai
Foreign Trade Consulting
Sublimation Instrument Consultation
Industrial Equipment Consulting
Jiangsu, Zhejiang, Guangdong, Fujian
Hunan Shanxi Gansu Hainan
Guangxi
Beijing, Tianjin, Liaoning, Henan
Hebei, Shanghai, Sichuan, Chongqing
Inner Mongolia, Xinjiang, Ningxia
Tibet Qinghai
Anhui, Guizhou, Yunnan, Hubei
Jilin, Shaanxi, Heilongjiang, Jiangxi
Shandong
Foreign Trade Consulting
Sublimation Instrument Consultation
Process Consulting
After-sales consultation
Copyright © 2026 Anhui Beiyike Equipment Technology Co., Ltd. All rights reserved.


















