undefined
undefined
+
  • undefined
  • undefined

Vacuum Hot Pressing Furnace BTF-1200C-VP

Equipment Model: BTF-1200C-VP Equipment Overview: This equipment is primarily used for powder hot‑press sintering. It employs a graphite plunger and graphite dies to simultaneously apply pressure and heat the powder to a specified temperature, producing dense, uniformly structured parts. The system comprises the following key components: a heating furnace chamber, an electric hydraulic drive, a vacuum system, a furnace tube lifting mechanism, a water‑cooling system, and a touch‑screen control unit.

Keywords:

Close
  • 产品对比
Total X Clear all
  • Product Description
  • Product Video
  • Experimental Case
  • Accessories and Consumables
  • Key Features

    ·   Open‑type vertical heating element; the furnace tube flange can be rotated about its axis to remove it from the furnace chamber.

    ·   Standard configuration includes a Φ100 mm quartz tube with vacuum sealing and a 40-ton electric press.

    ·   Graphite mandrels and graphite molds are employed to heat the powder to its normal sintering temperature or slightly below while applying pressure, enabling the formation of dense, uniform parts in a relatively short sintering cycle.

    Main Parameters

    · Rated Voltage: AC 220V, 50/60Hz; Rated power: 3kW

    ·   Maximum temperature: 1200℃

    · Continuous work Temperature: ≤1150℃

    · Heating rate: ≤10°C/min

    · Graphite compression rod diameter: 87 mm

    · Piston diameter: 87 mm

    · Pressure stroke: 50 mm

    · Holding time: 0–50 min

    · Pressure stability: ≤1 MPa/5 min

    · Heating element: resistance wire (molybdenum‑doped iron‑chromium‑aluminum alloy)

    · Thermocouple type: Type K

    Furnace tube &Flange

    · Furnace tube specifications: High-purity quartz tube Φ100*460mm

    · Custom Vacuum-Sealed Flange

    Temperature control system

    ·   Fuzzy PID Control and Self-Tuning Regulation

    · Intelligent 30-segment programmable control

    · Features ultra‑gentle operation and open‑circuit alarm functionality.

    · Temperature control accuracy: ±1℃

    Vacuum pressure

    · The mechanical pump can achieve a pressure as low as 1 Pa.

    ·   The molecular pump can reach 10. -4 pa

    Equipment weight

    · Net weight: approximately 300 kg

    Warranty period

    ·   One-year warranty, lifetime maintenance.

    · Consumable parts such as heating elements, sealing rings, and furnace tubes are not included.

    · Damage caused by human error or by the use of corrosive and acidic gases is not covered under warranty.

    Precautions

    ·   Graphite must be used under oxygen-free conditions.

    ·   When calculating pressure, the contact area should be taken into account.

    · As usage time increases, small cracks may appear on the furnace lining surface; this is normal, and the cracks can be repaired with an alumina coating.

    Certification

    · CE certification   TUV (UL61010) or CSA certification is available for an additional fee.

Consultation Message