undefined
+
  • undefined

Wide‑width roll‑to‑roll continuous graphene CVD equipment RTR‑CVD‑500

Equipment Model: RTR-CVD-500

Keywords:

Close
  • 产品对比
Total X Clear all
  • Product Information
  • Product Video
  • Experimental Case
  • Accessories and Consumables
  • Structural Description

      Unwinding bin

    · The left end is equipped with a mobile carriage for holding the coil material, while the chamber houses a coil‑fixing bracket along with devices for web‑guidance correction, tension control, and linear‑speed monitoring, enabling automatic adjustment of the coil’s operating condition during operation.

    ·   The three exterior sides of the compartment are equipped with hinged doors for operation and maintenance.

    ·   Meanwhile, in the closed state, the operating status of the internal mechanisms can be observed through the observation window on the door and the interior lighting.

    ·   A KF port is provided on the exterior of the equipment for expansion.

      Preheating Zone

    ·   The preheating zone is 1000 mm long.

    ·   The upper and lower sections are equipped with resistance wire heating and thermocouple temperature control; the inner wall of the chamber is lined with a graphite plate, and an inlet gas line is mounted on the top. Additionally, a KF flange is provided at the bottom for future installation of accessories.

    ·   The device is equipped with air cooling on both the front and rear sides to dissipate heat from the enclosure.

      Reaction zone

    ·   The reaction zone has a length of 1000 mm.

    ·   The upper and lower sections are equipped with resistance‑wire heating and thermocouple temperature control; the inner wall of the chamber is lined with a graphite plate, and an inlet gas line (for introducing the reaction gas) is mounted on the top. Additionally, a KF‑type port is provided at the bottom for future installation of accessories.

    ·   The equipment is equipped with air cooling on both the front and rear sides to dissipate heat from the housing. The front panel features pneumatic components for manual operation, while the rear of the housing includes an outlet port controlled by a ball valve. Additionally, a liquid separator combined with a peristaltic pump is provided for liquid intake.

      Cooling Zone

    ·   The cooling zone is 1000 mm long.

    ·   The cavity is a double-layer water-cooled housing; after passing through the narrow channel of the cooling zone, the coil material is cooled down before being fed into the take-up chamber.

      Winding bin

    ·   The right end of the winding chamber is equipped with a mobile carriage for accommodating coil stock, while the chamber houses a resistance‑based detection system and web‑guiding and tension‑control devices to automatically adjust the coil’s running condition during operation.

    ·   The three exterior sides of the compartment are equipped with hinged doors for operation and maintenance.

    ·   Meanwhile, in the closed state, the operating status of the internal mechanisms can be observed through the observation window on the door and the interior lighting.

    ·   A KF port is provided on the exterior of the equipment for expansion.

    Main Parameters

    · Rated voltage: 380V, Rated power: 92KW

    ·   Maximum sustainable temperature: 800°C in the preheating zone, 1150°C in the reaction zone.

    · Recommended heating rate: ≤10°C/min

    · Heating zone length: 1000 + 1000 + 1000 mm (preheating zone + reaction zone + cooling zone)

    ·   Roll-up width: 500 mm, 750 mm, 1000 mm, 1500 mm (optional)

    · Heating element: resistance wire

    · Thermocouple type: Type K

    ·   Separation tank volume: 10 L (cylindrical)

    ·   Peristaltic Pump: BT100S-DT15-44 (Four Channels)

    ·   Gas Path: 4-way (Mixed)

    ·   Air inlet: Φ6 double ferrule

    ·   Exhaust outlet: Φ65 pagoda-type nozzle

    ·   Inlet and outlet connections: Φ16 pagoda-type nozzle

    Temperature control system

    ·   Fuzzy PID Control and Self-Tuning Regulation

    ·   Intelligent 30-segment programmable control

    · Temperature control accuracy: ±1℃

    Equipment dimensions &Weight

    · Device dimensions: 6135 x 2045 x 2310 mm (Length × Width × Height)

    · Equipment net weight: approximately 4 tons

    Warranty period

    ·   One-year warranty, lifetime maintenance.

    · Consumable parts such as heating elements, sealing rings, and sample holders are not included.

    · Damage caused by human error or manufacturing defects—such as exposure to corrosive gases, strong acids, or strong alkalis—is not covered under the warranty.

Related products

Consultation Message