undefined
+
  • undefined

Tubular Vacuum Degassing Furnace

Keywords:

Close
  • 产品对比
Total X Clear all
  • Product Information
  • Product Video
  • Experimental Case
  • Accessories and Consumables
  • Technical Specifications

    (Customizable)

    Device model

    BTF-1100C-III-150

    BTF-1100C-III-210

    BTF-1100C-III-280

    Heating method

    Resistance wire

    Resistance wire

    Resistance wire

    Maximum operating temperature

    1100℃

    1100℃

    1100℃

    Long-term operating temperature

    1050℃

    1050℃

    1050℃

    Quartz tube dimensions

    Φ150x1400mm

    Φ210x1400mm

    Φ280x1400mm

    Temperature control method

    Fuzzy PID control and self-tuning regulation, with intelligent 30-segment programmable control.

    Temperature control accuracy

    ±1℃

    ±1℃

    ±1℃

    Sealing method

    Water-cooled flange seal

    Water-cooled flange seal

    Water-cooled flange seal

    Mechanical pump

    Mechanical pump (10 -1 Pa), molecular pump (10 -3 Pa)

    Warranty period

    ·   One-year warranty, lifetime maintenance.

    ·   Consumable components such as thermocouples, furnace tubes, sealing rings, and sample holders are not covered under the warranty.

    ·   Damage caused by process-related issues, such as the use of corrosive gases or strong acids and bases, is not covered under warranty.

    Precautions

    ·   The gas pressure inside the quartz tube must not exceed 0.02 MPa (gauge pressure).

    ·   For experiments involving sample heating, it is not recommended to operate the system with both the vacuum valve and the purge valve at the furnace tube flange closed. If it becomes necessary to close these valves during heating, continuously monitor the pressure gauge; if the pressure exceeds 0.02 MPa, immediately open the vent valve to prevent potential accidents, such as rupture of the furnace tube or ejection of the flange.

    ·   If, due to process requirements, flammable, explosive, or toxic gases must be used, you are responsible for implementing all necessary safety and explosion‑proof measures. Our company shall not be liable for any issues arising from improper operation during the use of such gases.

    · As the furnace is used over time, minor cracks may develop; this is normal, and the cracks can be repaired with an alumina coating.

Consultation Message