undefined
+
  • undefined

Box-type Annealing Furnace TRF-1300C-SL

Equipment Model: TRF-1300C-SL Equipment Overview: The equipment employs resistance‑heated belts combined with resistance wire heating. For thermal insulation and material transfer, it utilizes vacuum‑adsorbed alumina fiber inorganic materials, ensuring environmental friendliness, energy efficiency, and a clean, aesthetically pleasing operation free of contaminants. The control system features fuzzy PID regulation and intelligent PID precision control, delivering uniform temperature distribution and consistent sintering results. The unit can be equipped with a degassing device and an electric exhaust chimney, both programmable for on/off operation, making it suitable for handling volatile emissions such as exhaust gases and tar. This equipment is ideal for low‑temperature degassing, drying, and pre‑sintering processes of zirconia and other ceramic components and powdered materials.

Keywords:

Close
  • 产品对比
Total X Clear all
  • Product Information
  • Product Video
  • Experimental Case
  • Accessories and Consumables
  • Structural Description

    · Heating System: The equipment’s heating system employs a combination of resistance heating belts and resistance wires as heating elements, all fabricated from high‑quality iron‑chromium‑aluminum alloy, enabling the device to operate continuously at 1200°C.

    · Temperature control system: The temperature‑controlled thermocouple employs an S‑type thermocouple and features a 15.7‑inch LCD touch screen for intuitive operation, fuzzy PID control with auto‑tuning, and intelligent 30‑segment programmable control. It also includes over‑temperature and thermocouple‑open‑circuit alarm functions, with temperature control accuracy of ±1°C.

    · Electric mobile system for the furnace door charging platform: The furnace door is opened using a 1.5 kW variable-speed motor with frequency control, allowing the opening speed to be adjusted as needed and tailored to the specific operating conditions.

    Main Parameters
    (Customizable)

    · Rated voltage: 380V  50/60 Hz, Rated Power: 150 kW

    · Maximum temperature: <1250℃

    · Continuous operating temperature : ≤1200℃

    · Recommended heating rate: ≤1 0°C/min

    · Heating zone dimensions: 1650 x 1900 x 750 mm

    · Heating element: resistance heating tape + resistance wire

    · Thermocouple type: Type S

    Temperature control system

    · 15.7-inch LCD touch screen with touch control

    · Fuzzy PID Control and Self-Tuning Regulation

    · Intelligent 30-segment programmable control

    ·   Features ultra‑gentle operation and open‑circuit alarm functionality.

    ·   Temperature control accuracy: ± 1℃

    Size &Weight

    · Furnace dimensions: 5150  x 2800   x 2300mm (Length × Width × Height)

    · Control cabinet dimensions: 950   x 500 x 2300 mm (Length × Width × Height)

    · Equipment net weight: approximately 3,500 kg

    Warranty period

    ·   One-year warranty, lifetime maintenance.

    · Consumable components such as the turntable, heating elements, and sample holders are not included.

    · Damage caused by the use of corrosive gases and acidic gases is not covered under warranty.

    Precautions

    ·   It is recommended to place the sample in a crucible rather than directly on the chamber floor.

    ·   This equipment is not equipped with a vacuum sealing system and is not recommended for use with toxic or explosive gases. An inlet connector can be installed to allow the introduction of an inert gas or oxygen.

    ·   As the furnace is used over time, small cracks may appear on the furnace lining. This is normal, and the cracks can be repaired with an alumina coating.

Consultation Message